Aquila T Series User Manual

T-Tiny/T-Micro Taximeter User Guide © Aquila Electronics Limited
Aquila T-Tiny
+
- T-Micro
Taximeter User Guide
This manual describes the operation of the T-Tiny
+
and T-Micro
Taximeters once correctly installed and configured by an authorised
Aquila Taximeter Dealer. Aquila Electronics Limited reserve the right
to change the specification of its products without notice. If any
further information is required, please contact your local dealer.
N00523 Issue 5. May 2018
Instructions in this manual refer to both T-Tiny+ and
T-Micro models except where indicated

Aquila T Series Specifications

General

Brand	Aquila
Model	T Series
Category	Measuring Instruments
Language	English

Summary

Differences Between T-Tiny+ and T-Micro

The Basics of the T-Tiny Taximeter

T-Tiny Buttons Overview

Details the function of the 'Money' and 'Enter' keys on the T-Tiny taximeter.

Operating Modes

Standby Mode

Describes the initial power-up state, display, and button functions.

FOR HIRE Mode

Explains FOR HIRE mode, including rate display and manual rate selection.

HIRED Mode

Details HIRED mode for calculating fares based on time and distance.

STOPPED Mode

Covers STOPPED mode, where fare calculation is based on distance only.

Tariffs and Options

Tariffs

Explains the need for tariff programming and its included information.

Tariff Code

Describes the unique numbering system for tariff programs.

Receipt Programs

Details the optional receipt programs and their identification.

The User Menus

User Menus: Totals

Allows reading and resetting of meter's earnings and journey totals.

User Menus: Print Out

Option to print receipts, not supported on T-Micro model.

User Menus: Info - Brightness Settings

Adjusts brightness for buttons and display.

User Menus: Info - Identification

Displays serial number, tariff number, software version, and receipt number.

User Menus: Info - Time, Date, Calibration

Settings for clock, date, daylight saving, and calibration.

User Menus: Info - Testing and Alerts

Pulse count testing and control for audible alerts.

Power Interruptions

Short Power Interruptions

Details meter behavior during power interruptions less than 19 seconds.

Longer Power Interruptions

Explains meter behavior during power interruptions of 19 seconds or more.

The T-TINY's Battery and Clock

Setting the Clock

Procedure for setting the T-TINY's internal clock after power loss.