3.3 HIRED Mode
HIRED mode is the mode in which the T-TINY calculates the fare based
on a combination of time and distance. As soon as the meter is placed in
HIRED mode, it begins to calculate the fare based on the tariff
programmed into it.
There are some conditions which will prevent the T-TINY from entering
HIRED mode from FOR HIRE mode. These include:
1. The absence of a tariff program
2. An external device such as a Mobile Data Terminal is connected, and it
is preventing the T-TINY from entering HIRED mode.
In case of item 2, please contact your dealer for assistance.
6
The EXTRAS
added so far.
The current
Fare
Hold down MONEY and press
ENTER to select the rate the T-
TINY will charge. The effect of this
button depends on the tariff in the
meter (* this function of the T-Tiny
is changed if Multiple Extras are
included in the Tariff)
Hold down MONEY
for 2 seconds to
pause the fare. (See
page 6)
Press MONEY
to add extras
(See Page 6)
Press ENTER to
go to STOPPED
mode
To Next Page
Loading...
