AR Blue Clean 6630 - User Manual

AR BLUE CLEAN 6630 - 6640 - 6650 - 6670
USE AND MAINTENANCE HANDBOOK page 1
6630 - 6640 - 6650 - 6670
Read carefully the present use and maintenance manual in every part before
proceeding to use. The following machine has been examined according to the
Directive Machines 2006/42, 2004/108, 2006/95 and following changes and
integrations.
Annovi Reverberi S.p.A
SERVICE Dept.
Via Aldo Moro, 40/42
41030 Bomporto (MO) – Italy
supporth@annovireverberi.it
USE AND
MAINTENANCE
HANDBOOK
Code XXXXX - XX
https://www.kipogeorgiki.gr/
https://www.kipogeorgiki.gr/
ΦΥΤΑ - ΜΗΧΑΝΗΜΑΤΑ - ΕΡΓΑΛΕΙΑ
18ο Χλμ. Εθνικής Οδού ΑΘΗΝΩΝ-ΚΟΡΙΝΘΟΥ
Τηλέφωνο: 2105573739
E-mail: info@kipogeorgiki.gr

Summary

General Instructions

Machine Identification Plate

Key of the Identification Plate

Explains the meaning of each label on the machine's identification plate.

Technical Features and Dimensions

Main Parts

Jobs and Safety Rules

Machine Installation

Machine Running

Standard Equipment

Detergents

Electric Wiring Diagram

Labels

Electrocution Controls Box Label

Identifier for the electrical control box warning label.

High Temperature Gases Outlet Label

Warning label for dangerous hot gas outlet.

Outlet Label

Indicates the machine's outlet point.

Water Supply Label

Indicates the water inlet connection point.

Earth Connection Label

Label signifying the earth connection point for safety.

Detergent Intake Label

Label indicating the detergent suction inlet.

High Pressure Jet Caution Label

Caution against directing high-pressure jet at people or objects.

Maintenance

Daily Maintenance Checks

Routine checks required daily to ensure proper operation.

Bi-Weekly Maintenance Checks

Maintenance tasks to be performed every two weeks or 50 hours.

Cooling Coil Internal Cleaning

Machine Demolition

Warranty

Drawbacks, Causes and Solution

Declaration of Conformity

AR Blue Clean 6630 Specifications

General

Model	AR Blue Clean 6630
Category	Washer
Max Flow Rate	1.4 GPM
Power Source	Electric
Motor Type	Induction
Hose Length	20 ft
Cord Length	35 ft
GPM	1.4 GPM
Motor	Induction
Nozzles Included	25º
Max PSI	2000 PSI