What to do if the ARAG GPS display does not switch on?
If your ARAG GPS display doesn't switch on, first, ensure the power supply is properly connected. If the power is on, try pressing the ON key to start the computer.
How to fix ARAG navigator Bravo 400S GPS receiver not connected?
If the ARAG GPS receiver is not connected, check the connection of the receiver cable to the Navigator. If the connection is correct, the receiver connection cable may be damaged and require replacement. Alternatively, the receiver itself might be damaged, also requiring replacement.
What to do if DGPS correction is not available on ARAG navigator Bravo 400S GPS?
If the DGPS correction is not available on your ARAG GPS, it might be because the DGPS signal is unavailable in your current working area. In this case, disable DGPS correction. Alternatively, the system might still be connecting; wait for the connection to establish.
Why is the ARAG GPS speed reading unstable?
If your ARAG GPS speed reading is unstable, it may be due to starting the job too far from the field. Initiate a new job closer to the field to resolve this.
What to do if ARAG GPS distance traveled count is wrong?
If your ARAG GPS distance traveled count does not match the actual distance covered, the boom setup, implement geometry, or tractor geometry might be incorrect. Verify the boom setup and check the implement and tractor geometry.
Why ARAG navigator Bravo 400S receiver gives invalid data?
If the ARAG GPS receiver gives invalid data, it is likely establishing a connection to the satellites. Please wait for the connection to complete.
Why ARAG navigator Bravo 400S GPS has insufficient GPS signal quality?
If you're experiencing insufficient GPS signal quality with your ARAG GPS, it's possible that the position and number of satellites do not allow a suitable driving precision. Wait for the signal strength to improve.
What to do if ARAG GPS job origin is too far away?
If the job origin is too far away on your ARAG GPS, it means that your current position is too distant from the defined job origin. Redefine the job origin to your current location.
Safety and installation precautions before assembly.
Guidance on mounting and locating the Navigator on agricultural machinery.
Instructions for connecting power supply, cameras, and memory devices.
Initial configuration steps including language, implement, and tractor settings.
Procedures for selecting, creating, and managing implement profiles.
Detailed configuration of implement-specific parameters like sections and working limits.
Configuration of tractor, GPS receiver, camera, and geometry settings.
Step-by-step guide for performing spraying operations in a field.
Functions for managing current and new spraying jobs.
To Next Page
General
