JACK Instruction Manual / 31
Original Instruction
ARB Jack 1060001 EC Declaration of Conformity - 2019-07-30 Version 1
EC DECLARATION OF CONFORMITY
(Original Language Version)
In accordance with:
EC Machinery Directive 2006/42/EC (Annex II 1A)
We herewith declare that the:
Product description: Hydraulic long travel 4x4 recovery jack, 2000kg capacity
Model Name: Jack
Model Number: 1060001
Serial Number: 19080001 onwards
Manufacturer: ARB Corporation Ltd
42-44 Garden St
Kilsyth 3137
Victoria, Australia
when used in accordance with the manufacturer’s instructions, conforms with the essential health and safety
requirements of the Machinery Directive.
In support of this declaration the subject equipment has been evaluated as complying with:
a) The Machinery Directive Relevant Essential Health and Safety Requirements (Annex I), by compliance
with the applicable clauses of the following harmonised standards:
EN ISO 12100, EN 1494 and associated standards
b) The Pressure Equipment Directive (2014/68/EU) by calculation results being less that CAT I (Group 2
Liquids) and thereby covered by the Machinery Directive.
Technical File for Compliance with 2006/42/EC, “ARB Jack 1060001 Technical File - 2019-07-30 Version 1”
dated 30 July 2019, is held by the manufacturer.
The Person Authorised to Compile the Technical File (TF) under the EU Machinery Directive (2006/42/EC) is:
Mr. Tomas Vobr
General Manager
ARB Europe s.r.o.
Na Dlouhém č.80, DC2
251 01 Říčany – Jažlovice
Czech Republic
If the equipment is modified without the agreement of the undersigned, this declaration becomes invalid.
BEN MITCHELL DIRECTOR OF OPERATIONS
Name of Person Signing Position in Organisation
30 July 2019, Kilsyth, Victoria, Australia
Signed Date & Place of Signing
To Next Page
Loading...