To Next PageTo Next Page
Need help?Do you have a question about the ARC Audio KS 900.6 and is the answer not in the manual?
Connect the ground wire directly to the vehicle chassis, ensuring a clean metal surface and a secure connection for high current.
Carefully route power and signal cables, using rubber grommets to prevent shorts and fire risk. Use appropriate gauge wire.
Adjust amplifier input sensitivity to match head unit output without clipping, prioritizing the lowest setting for noise reduction.
Mount the amplifier securely to a solid, dry surface in the trunk or passenger compartment, avoiding vibration and ensuring airflow.
Optional input for center channel, bypassing Sub crossover for High Pass controls. Affects Sub 2 output.
Selects signal routing for amplifier sections, offering Stereo, bridged, or mono operation modes for optimal sound.
Configures RCA inputs for bridging, allowing the amplifier to act as a 2-channel unit for higher power output.
Removes unwanted frequencies from speakers or amplifiers to prevent damage and ensure proper sound reproduction.
Adjustable bass boost for Sub 1 and Sub 2, affecting low frequencies. Use cautiously due to high power demands.
Multi-channel speaker output terminals for connecting speakers. Ensure correct wiring and impedance matching.
Switches to control signal routing for multiple channel configurations, allowing single RCA pair for all outputs.
Details what is not covered by the warranty, including misuse, unauthorized modifications, and cosmetic damage.
Instructions for submitting products for warranty or non-warranty repairs, including contact information.
General