To Next PageTo Next Page
Need help?Do you have a question about the ARC Audio MOTO 600.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| THD | <0.05% |
| Input Sensitivity | 200 mV - 4 V |
| Dimensions | 10.5" x 9.5" x 2.5" |
| Power Output (RMS) @ 2 Ohms | 100 Watts |
Securely mount the amplifier to a solid, dry surface away from excessive vibration.
Ensure the vehicle's electrical system provides adequate voltage and current for amplifier operation.
Connect the ground wire directly to the chassis using a clear, paint-free location and a secure screw.
Details on connecting various audio sources, including speaker-level inputs.
How to adjust input sensitivity to match the head unit's output for optimal performance.
Explains how to filter unwanted frequencies for specific speaker types.
Information on applying adjustable bass boost for front speakers.
Explanation of the LED display for monitoring amplifier status and fault codes.
System for mixing different impedance loads to achieve full power output.
Details on connecting speaker wires securely to the amplifier's terminals.
