Do you have a question about the ARC Audio XXD and is the answer not in the manual?
Brand | ARC Audio |
---|---|
Model | XXD |
Category | Car Amplifier |
Language | English |
Details the one-year warranty period, application to original purchaser, and transferability limitations.
Lists conditions not covered, including misuse, improper wiring, and tampering.
Outlines requirements for warranty returns, including shipping and proof of purchase.
Limits ARC Audio's liability for incidental or consequential damages.
Warns about potential hearing damage from prolonged high-volume listening.
Advises awareness of local and state laws regarding car audio system volume.
Emphasizes checking installation location and avoiding vehicle structure/hidden components.
Specifies secure mounting on a solid, dry surface away from vibration.
Explains the amplifier's power conversion and the need for a healthy vehicle charging system.
Details connecting the ground wire directly to the chassis and preparing the surface.
Advises running signal cables away from power or vehicle wiring to minimize noise.
Guides on routing power and signal cables, using grommets, and recommending fuse placement.
Explains how to set amplifier gains and discusses input voltage tolerance.
Describes the gain control as an input sensitivity adjustment, not a volume limiter.
Provides guidance on setting gains to compensate for speaker differences and achieve optimal sound.
Explains the function of the subwoofer input switch for signal source selection.
Defines crossovers and their importance in filtering frequencies for speakers.
Details bass boost controls and usage cautions for enhanced low frequencies.
Explains multi-channel speaker outputs and proper connection techniques to avoid protection mode.
Stresses the importance of knowing the total ohm load before connecting speakers.
Instructs to disconnect the car battery's negative cable before starting.
Guides on running the power wire from the battery, emphasizing gauge and potential shorts.
Details connecting the power wire to the battery with a fuse near the battery.
Explains finding and preparing a clean metal area on the chassis for the ground connection.
Advises running speaker wires, leaving extra length for later adjustments.
Recommends mounting the amplifier if not already done.
Instructs to connect the power and ground wires to the amplifier.
Directs to install the main fuse at the battery only after connecting power to the amplifier.
Details connecting speaker wires to the amplifier, ensuring correct polarity.
Guides on connecting the RCA audio cables to the amplifier.
Advises double-checking all amplifier controls for correct settings.
Details the initial power-up procedure, starting with low gain and volume.
Guides on tuning the amplifier, making adjustments one at a time, and monitoring battery voltage.
Illustrates wiring configuration for the XXO 2080 amplifier in bridged 4 ohm mode.
Shows wiring for the XXO 2080 amplifier in stereo fullrange or high pass 2 or 4 ohm configurations.
Diagram for wiring the XXO 4080 amplifier in a 4-channel stereo high pass configuration.
Wiring diagram for the XXO 4080 in stereo high pass with a mono subwoofer setup.
Wiring diagram for the XXO 5080 amplifier in a 4-channel stereo high pass setup with a subwoofer.
Illustrates wiring for the XXO 5080 amplifier in a 2-channel stereo high pass configuration with a subwoofer.
Wiring diagram for the XXO 1500 1 Ohm Stable Class D Subwoofer Amplifier.
General guide for power wiring connections applicable to all amplifier models.
Provides physical dimensions for various XXO amplifier models.