Do you have a question about the ARC Audio XDi and is the answer not in the manual?
Series | XDi |
---|---|
Amplifier Class | Class D |
Frequency Response | 10Hz - 30kHz |
Signal to Noise Ratio | >95dB |
Input Sensitivity | 0.2V - 6V |
Details warranty coverage, exclusions, transferability, and manufacturer's responsibilities for defects.
Outlines the procedure for returning products for warranty service, including proof of purchase and authorization requirements.
Highlights the Full Range Class D architecture for improved efficiency and lower heat output.
Alerts users to potential hearing damage from high volumes and local laws governing audio system loudness.
Advises on selecting suitable installation locations and consulting professionals for complex electrical work.
Explains the need for adequate vehicle electrical system performance and proper wiring for high-current audio amplifiers.
Emphasizes the critical importance of a secure, low-resistance chassis ground connection for optimal performance.
Provides guidance on running power and signal cables safely, using grommets, and installing fuses.
Explains the input stage rating and the principle of setting gains relative to head unit output for optimal performance.
Details how to adjust input sensitivity (gain) for optimal system balance and noise reduction.
Explains the function of crossovers in filtering frequencies for different speaker types.
Describes how to adjust speaker timing for better bass response and sound staging.
Covers the use and adjustment of Quasi Parametric Bass EQ for enhanced low-frequency response.
Explains the role of the subsonic filter in removing very low frequencies to protect woofers.
Guides on making secure speaker connections to the amplifier terminals and avoiding short circuits.
Provides a detailed, numbered sequence for installing the amplifier, from battery disconnection to final checks.
Lists power output values for different models at various impedances and bridged configurations.
Details Total Harmonic Distortion, Signal-to-Noise Ratio, and Gain Range for amplifier performance.
Covers the crossover range, frequency range, and bass boost characteristics of the amplifiers.
Illustrates the wiring for a 4-channel stereo setup with a subwoofer on the XD1803 amplifier.
Shows the wiring for a 2-channel stereo setup with a subwoofer on the XD1803 amplifier.
Details the wiring for a 4-channel stereo setup for the XDi408 amplifier.
Illustrates the wiring for a high-pass stereo setup with a mono subwoofer for the XDi408 amplifier.
Shows the wiring diagram for a 4-channel stereo setup with a subwoofer for the XDi805 amplifier.
Provides the wiring diagram for a 2-channel stereo setup with a subwoofer for the XDi805 amplifier.
Explains the operation of controls like Subsonic Filter and Bass Boost on subwoofer amplifiers.
Details typical power wiring connections and impedance configurations for subwoofer amplifiers.
Offers advice on wire gauge, fuse placement, and length for power connections to all models.
Lists the physical dimensions for various XDi amplifier models for installation planning.