Need help?Do you have a question about the ARC DG-O FORTE and is the answer not in the manual?
One button control for open, stop, close. Light on during operation, off after 3 mins. Controls unit by computer program.
Door pauses/rebounds on obstruction. Unit has overload, overheat, low power protection.
Low noise, soft start, slow stopping to protect the unit and ensure longevity.
LED displays working status. Decoding uses Rolling Code.
Manual door operation without power. Optional features include photo beams, battery backup, wall button, flash light.
Travel time protection, hall component protection, and low voltage protection.
List of tools for installation: drill, step ladder, ratchet, tape measure, level, screwdriver, tongs, multimeter, wrench, hammer.
Detailed diagram and labels for installing the operator and rail components.
Ensure shuttle is locked. Power on, courtesy light and LED display sequence indicates standby.
Procedure to set open and close limits by moving the door and pressing buttons.
Process for adding new transmitters or clearing existing ones. Includes canceling all codes.
Door rebounds on overload. Settings for force requirements are displayed.
Adjusts the auto-close feature from OFF up to one minute increments.
Enable or disable the photo beam safety feature.
Enables/disables the lock door function, preventing operation until unlocked.
Safety and usage instructions for the garage door opener.
Troubleshooting guide for common problems and their solutions.
General| Motor Type | DC Motor |
|---|---|
| Type | Garage Door Opener |
| Speed | 7 inches per second |
| Power Supply | 120V AC |
| Safety Features | photoelectric sensors |
| Remote Control | Yes, included |
To Next Page