FUNCTIONS
MICRO INTELLECTUAL CONTROL – ONE BUTTON TO CONTROL OPEN, STOP AND CLOSE. THE LIGHT WILL BE ON WHILE OPENING OR CLOSING THE DOOR, THREE MINUTES LATER
THE LIGHT WILL BE OFF AUTOMATICALLY. CONTROL THE UNIT RUNNING BY COMPUTER PROGRAM.
TEST THE FORCE OF OPEN OR CLOSE THE DOOR, THE UNIT HAS THE FUNCTION OF PHOTO BEAMS, AUTO-CLOSE, LOCK DOOR ETC.
THE DOOR WILL PAUSE MOMENTARILY THEN REBOUND WHEN IT REACHES THE HINDERS ON THE CLOSING WAY. THE UNIT HAS THE PROTECTING FUNCTIONS OF OVERLOAD,
OVER HOT OR LOW POWER INPUT ETC.
DC MOTOR – LOW NOISE, SOFT START, SLOW STOPPING TO PROTECT THE UNIT AND MAKE SURE IT CAN BE USED FOR A LONG TIME.
LED DISPLAY – WORKING SITUATION CAN BE SHOWN ON THE LED SCREEN.
DECODING – ROLLING CODE.
MANUAL DISENGAGEMENT – OPEN AND CLOSE THE DOOR BY HAND WITHOUT POWER.
OPTIONAL FUNCTIONS – PHOTO BEAMS, BATTERY BACKUP, WALL BUTTON AND FLASH LIGHT.
SPECIAL PROTECTION FUNCTIONS – TRAVEL TIME PROTECTION, HALL COMPONENT PROTECTS AND LOW VOLTAGE PROTECTION.
TECHNICAL SPECIFICATIONS
Power input 220v ac +-10% 50-60hz Reception frequency 433.92 MHz
Motor 24v DC Decoding Rolling Code
Working Temp -20 - +50 c Transmitter power 27A 12V battery
Relative humidity <90% Globe LED
Open and Close Force 600n 800n 1000n 1200n Courtesy light time 2 minutes
To Next Page
Loading...