Need help?Do you have a question about the Arcam Alpha 10 and is the answer not in the manual?
General| FM Tuning Range | 87.5 - 108 MHz |
|---|---|
| LW Tuning Range | 144 - 288 kHz |
| Stereo Separation | 45dB at 1kHz |
| Output | 775mV |
| Type | FM/AM tuner |
| Signal to Noise Ratio | 75 dB (FM), 50 dB (MW/LW) |
| Distortion | 0.2% (FM), 0.5% (MW/LW) |
| Total Harmonic Distortion | 0.2% (FM), 0.5% (MW/LW) |
| Frequency Response | 30Hz - 15kHz |
Connect the tuner to the mains power supply and external equipment, including audio and digital outputs.
Instructions for connecting the aerial cable to the tuner's input socket.
Important safety information and recommendations for proper tuner operation and user safety.
Guide to selecting and positioning an aerial for optimal DAB reception.
Instructions on how to perform a search to find available DAB radio stations.
Addresses 'Service not found', 'No Signal', 'No services stored', and 'signal weak - muted'.
To Next Page
