Need help?Do you have a question about the Arcam Alpha 5 and is the answer not in the manual?
Details the toroidal transformer, rectification, smoothing, and regulation for +/-37V and +/-15V.
Describes the dual opamp phono stage, RIAA equalization, gain, and low-frequency roll-off.
Explains the tone control stage using dual op-amps and potentiometer controls for bass and treble.
Covers the input stage, constant current source, output MOSFETs, zener diodes, and shoot-through limiter.
Detailed steps for disassembling the amplifier unit from its chassis.
Details the toroidal transformer, rectification, smoothing, and regulation for +/-37V and +/-15V.
Describes the dual opamp phono stage, RIAA equalization, gain, and low-frequency roll-off.
Explains the tone control stage using dual op-amps and potentiometer controls for bass and treble.
Covers the input stage, constant current source, output MOSFETs, zener diodes, and shoot-through limiter.
Detailed steps for disassembling the amplifier unit from its chassis.
General| Type | Integrated Amplifier |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Input Sensitivity | 150mV (line) |
| Speaker Load Impedance | 8Ω |
| Power Output | 40 watts per channel into 8Ω (stereo) |
To Next Page
