Arcam CDS50 - Safety Guidelines and Precautions; Important Safety Instructions; Safety Compliance and Warnings; Installation Precautions

23425
CDS50 Software Release Notes
– 4 –
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK
Version 9
To update via network:
• Navigate to “Firmware Update” in the Settings Menu.
• Press OK.
To update via USB:
USA and Canada:
• Unzip the file named “20180626_CDS50_US_V9.fup” and put onto a memory stick (so it is the
only file on the stick).
• Turn on the CDS50 and wait for the unit to fully start.
• Insert the memory stick in the USB port, located in the rear of the CDS50.
• The upgrade file will be detected, then follow the VFD prompts.
• Once the update has been completed, remove the memory stick.
Rest of the world:
• Unzip the file named “20180626_CDS50_EUROPE_V9.fup” and put onto a memory stick (so it
is the only file on the stick).
• Turn on the CDS50 and wait for the unit to fully start.
• Insert the memory stick in the USB port, located in the rear of the CDS50.
• The upgrade file will be detected, then follow the VFD prompts.
• Once the update has been completed, remove the memory stick.
Fix list:
• 2759: Improved DAC unmute time