Archive CG13 - Page 13

MAINTENANCE OPERATION
Retightening cylinder head nuts,
manifold bolts and nuts and
carburetor securing nuts
Cylinder head bolts
When the engine is cold, retightening should
be made in the sequence shown.
: Cylinder head bolt
H20 & H25
78 to 93 N•m
(8.0 to 9.5 kg-m,
58 to 69 ft-lb)
Manifold and exhaust tube nut and
carburetor attaching nut
: Carburetor nuts
8 to12 N
•m
(0.8 to 1.2 kg-m,
5.8 to 8.7 ft-lb)
Manifold nuts
14 to 18 N•m
(1.4 to 1.8 kg-m,
10 to 13 ft-lb)
13
T
T
H25