8. Refill engine with new recommended
engine oil, referring to Recommended
Lubricants.
Check oil level with dipstick.
Oil capacity:
Unit: liter (US qt. lmp qt)
H20
With oil 4.2
filter (4-1/2, 3-3/4))
Without 3.7
oil filter (3.7/8, 3-1/4)
9. Start engine. Check area around drain
plug and oil filter for any sign of oil leak-
age.
If any leakage is evident, these parts have
not been properly installed.
10. Warm up engine sufficiently. Then stop
engine and wait a few minutes. Check
oil level. If necessary, add engine oil.
When checking oil level, set engine
at level.
Changing engine coolant
WARNING:
To avoid the danger of being scald-
ed, never attempt to change the
coolant when the engine is hot.
When using antifreeze coolant, mix the
antifreeze coolant with water, observing
instructions attached to antifreeze container.
Cleaning radiator outside
Clean outside of radiator with dry com-
pressed air.
Checking cooling system, hoses
and connections.
Check hoses and fittings for loose connec-
tions or deterioration. Retighten or replace if
necessary.
17
To Next Page
Loading...