To Next PageTo Next PageHow to fix Archos Blood Pressure Monitor when it has no power?
If your Archos Blood Pressure Monitor has no power, it could be due to exhausted batteries. Replace them with new ones. Another cause might be that the batteries are inserted incorrectly; make sure to insert them correctly.
Why does my Archos say low batteries?
If your Archos Blood Pressure Monitor indicates low batteries, it means the batteries are running low and need to be replaced with new ones.
What to do if Archos shows Error 5 or Error 6?
If your Archos Blood Pressure Monitor displays Error 5 or Error 6, it indicates a system error. Retake the measurement. If the problem persists, contact the retailer or our customer service department for further assistance. Refer to the warranty for contact information and return instructions.
What does Error 1 mean on Archos ?
If your Archos Blood Pressure Monitor shows Error 1, it means inflation is slow or the cuff is not secure. Refasten the cuff and then measure again.
What does Error 10 or Error 11 mean on Archos Blood Pressure Monitor?
If your Archos Blood Pressure Monitor shows Error 10 or Error 11, it means the monitor detected motion, talking or the pulse is too poor while measuring. Relax for a moment and then measure again.
What does Error 2 mean on my Archos Blood Pressure Monitor?
If your Archos Blood Pressure Monitor shows Error 2, it means the cuff is very tight. Readjust the cuff so it is not too loose or too tight, and then measure again.
What does Error 3 mean on Archos ?
If your Archos Blood Pressure Monitor displays Error 3, it indicates that the pressure of the cuff is excess. Refasten the cuff and then measure again.
What does Error 20 mean on Archos Blood Pressure Monitor?
If your Archos Blood Pressure Monitor shows Error 20, it means that the measurement process does not detect the pulse signal. Loosen the clothing on the wrist and then measure again.
What does Error 21 mean on the display of my Archos Blood Pressure Monitor?
If your Archos Blood Pressure Monitor displays Error 21, it indicates that the treatment of the measurement failed. Relax for a moment and then measure again.
Why Archos Blood Pressure Monitor shows no power?
If your Archos Blood Pressure Monitor has no power, this could be due to exhausted batteries. Replace them with new ones. Alternatively, the batteries might be inserted incorrectly; ensure they are correctly oriented.
General| Type | Upper Arm |
|---|---|
| Pulse Range | 40-180 bpm |
| Measurement Range (Pulse) | 40-180 bpm |
| Accuracy (Pressure) | +/- 3 mmHg |
| Accuracy (Pulse) | ±5% |
Details essential safety guidelines and warnings for the proper operation of the device.
Provides step-by-step instructions for correctly applying the cuff and resting before measurement.
