C
Clinton GilesSep 7, 2025
What to do if Archos shows error 1?
- DDavid JonesSep 7, 2025
If your Archos Blood Pressure Monitor displays error 1, it indicates that inflation is slow or the cuff is not secure. Refasten the cuff and try measuring again.
To Next PageTo Next PageWhat to do if Archos shows error 1?
If your Archos Blood Pressure Monitor displays error 1, it indicates that inflation is slow or the cuff is not secure. Refasten the cuff and try measuring again.
What to do if Archos Blood Pressure Monitor shows error 10 or error 11?
If your Archos Blood Pressure Monitor displays error 10 or error 11, it means the monitor detected motion, talking, or a poor pulse during measurement. Relax for a moment, and then measure again.
What to do if Archos Blood Pressure Monitor shows error 2?
If your Archos Blood Pressure Monitor displays error 2, it indicates that the cuff is very tight. Readjust the cuff so it is not too loose or too tight, and then measure again.
What to do if Archos shows error 3?
If your Archos Blood Pressure Monitor displays error 3, it means the cuff pressure is excessive. Refasten the cuff and then measure again.
General| Type | Upper Arm |
|---|---|
| Pulse Range | 40-180 bpm |
| Measurement Range (Pulse) | 40-180 bpm |
| Accuracy (Pressure) | +/- 3 mmHg |
| Accuracy (Pulse) | ±5% |
Details essential safety guidelines and warnings for the proper operation of the device.
Provides step-by-step instructions for correctly applying the cuff and resting before measurement.