ArcOne 1000FcF - Page 10

- 9-
5000V &
5000VX*
5130V &
5130VX*
5500V &
5500VX*
6000VI4
7000V &
7000VX*
7500V &
7500VX*
Viewing Area
4608 mm
2
(7.1 sq in)
4608 mm
2
(7.1 sq in)
4608 mm
2
(7.1 sq in)
8100 mm
2
(12.5 sq in)
5684 mm
2
(8.8 sq in)
5684 mm
2
(8.8 sq in)
Filter Size 90x110 mm 90x110 mm 90x110 mm 90x110 mm 90x110 mm 90x110 mm
ARC
Sensing
Two
sensors
Two
sensors
Two
sensors
Four
Sensors
Two
sensors
Two
sensors
Sensitivity
Control
Digital:
Variable
Digital:
Variable
Digital:
Variable
Analog:
Variable
Digital:
Variable
Digital:
Variable
Switching
Time
(seconds)
1/10,000
(0.1 msec)
1/10,000
(0.1 msec)
1/10,000
(0.1 msec)
1/10,000
(0.1 msec)
1/10,000
(0.1 msec)
1/10,000
(0.1 msec)
Primary Power Solar Cells Solar Cells Solar Cells
Lithium
Battery
Solar Cells Solar Cells
Back-up Power
Lithium
Battery
Lithium
Battery
Lithium
Battery
None
Lithium
Battery
Lithium
Battery
Operating
Temp.
-10-55C
(14-131F)
-10-55C
(14-131F)
-10-55C
(14-131F)
-10-55C
(14-131F)
-5-55C
(23-131F)
-5-55C
(23-131F)
Storage Temp.
-10-38C
(14-100F)
-10-38C
(14-100F)
-10-38C
(14-100F)
-10-38C
(14-100F)
-10-38C
(14-100F)
-10-38C
(14-100F)
UV / IR
Protection
Up to Shade 16 Up to Shade 16 Up to Shade 16 Up to Shade 16 Up to Shade 16 Up to Shade 16
Dark to Light
Delay
0.1-3.5
seconds
0.1-3.5
seconds
0.1-3.5
seconds
0.1 or 2
seconds
0.1-3.5
seconds
0.1-3.5
seconds
Light Shade 4 4 4 4 4 4
Dark Shade 9-13 5-9/9-13 9-13 9-13 5-9/9-13 5-9/9-13
Grind “Mode” Yes Yes Yes Yes Yes Yes
Intelligent
Auto-Shade
“Mode”
No No No No No No
Intelligent
TIG “Mode”
No No No No No No
Enclosure
Integrity
Dust / Water
Resistant
Dust / Water
Resistant
Dust / Water
Resistant
Dust / Water
Resistant
Dust / Water
Resistant
Dust / Water
Resistant
Standards
2
CE EN379
4
CE EN379
2
CE EN379
1
CE EN379
4
CE EN379
4
CE EN379
Optical Class 111111
Diffusion of
Light Class
1 1 1 2 1 1
Variation in
Luminous
Transmittance
Class
111111
Angle
Dependency
Class
2 2 2 1 1 1
Inside Cover
Plate Part
Numbers
04-OP 04-OP 04-OP 04-OP 10-IP 10-IP
Table 1. Filter Specifications (cont.)
*Filter variants designated with (X) have X-TIG “Mode” at the highest sensitivity setting. See Sensitivity
Adjustment section for details.