Arcsound HAZE - True Wireless Connection; True Wireless Stereo (TWS) Technology; First Time Connection with TWS

TRUE WIRELESS CONNECTION
True wireless stereo (TWS) technology
TWS technology enables you to make a wireless connection between two
speakers of the same model. When you use TWS to connect two HAZE porta-
ble speakers, they will automatically be grouped as a stereo-speaker system
and use outputs for the left and right channel.
Turn the power on both of the speakers, press the ”MODE” button or
”INPUT” button on the panel or remote control, and switch the speakers to
Bluetooth channel. Make sure the speakers are not connected to any smart
phone unit yet.
First time connection with TWS
1)
Press the ”PLAY/PAUSE” button on the control panel of one of the speakers
for 5 seconds until you hear the rst notication tone (beep). This speaker
becomes the main speaker (left channel) and automatically searches for
and connects with the other speaker (right channel). When the connection
between the speakers is successful, you will hear the second notication
tone (ding-dong).
2)
Connect your smartphone to the main speaker via Bluetooth. Search the
Bluetooth device list and select the Bluetooth name ”HAZE”. The speaker
will play a notication tone after a successful connection.
3)
Open your smartphone’s music player and play a song. The music is trans-
ferred via Bluetooth and sound comes out through both the HAZE speakers
as a TWS stereo-speaker system.
4)
NOTE! When you have connected two HAZE speakers together via TWS
mode, manipulations to the main speaker (left channel) will be simultaneously
done to the other speaker (right channel). Examples of these actions are
volume up/down, previous/next song selection, play/pause and power on/off.
5