Arcsound HAZE - Previously Connected with TWS; Disconnect Speakers from TWS; LED Lights

To Next Page

To Previous Page

TRUE WIRELESS CONNECTION

Previously connected with TWS

When the two HAZE portable speakers are turned on, press the ”MODE”

button and select Bluetooth mode. The speakers will automatically reconnect

with TWS as a stereo-speaker system. The speaker setup regarding main

speaker (left channel) and the second speaker (right channel) will remain the

same.

Disconnect speakers from TWS

To disconnect the speakers from each other, turn the speakers on and hold

the ”PLAY/PAUSE” button down for 5 seconds on the main speaker (left chan-

nel).

LED LIGHTS

The HAZE portable speaker has a built in LED display at the top, and decorati-

ve LED lights at the front behind the speaker grill. The LED display uses red

colour while the LED lights can shift between several colours. Press the

”LIGHT” button to switch between different decorative LED light modes. The

LED lights will follow the music beat when the speaker is playing. To turn off the

decorative LED lights, press the ”LIGHT” button down for 3 seconds.