1-6
5. On the 425, check the coolant level and add prop-
erly mixed coolant as necessary.
6. Charge the battery; then install. Connect the bat-
tery cables.
6. Check the entire brake systems (fluid level, pads,
etc.), all controls, lights, and headlight aim; adjust
or replace as necessary.
7. Tighten all nuts, bolts, cap screws, and screws
making sure all calibrated nuts, cap screws, and
bolts are tightened to specifications.
8. Check tire pressure. Inflate to recommended pres-
sure as necessary.
9. Make sure the steering moves freely and does not
bind.
10. Check the spark plug. Clean or replace as neces-
sary.
CAUTION
The ignition switch must be in the OFF position prior
to installing the battery or damage may occur to the
ignition system.
CAUTION
Connect the positive battery cable first; then the neg-
ative.
Section
Table of Contents
Manual
Table of Contents
For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
