PREPARATION AFTER STORAGE 71
13. On electric start models, charge
the battery until fully charged (see
Battery sub-section in the Mainte-
nance section); then connect the
battery cables making sure to con-
nect the positive cable first. Test
the electric start system.
14. Inspect the entire brake system, all
controls, headlight, taillight,
brakelight, ski wear bars, and
headlight aim; adjust or replace as
necessary.
15. Adjust the track to the proper ten-
sion and alignments (see Track
Tension and Track Alignment sub-
sections in the Maintenance sec-
tion).
To Next Page