Need help?Do you have a question about the Arctic Cat ZR 7000 and is the answer not in the manual?
General| Brand | Arctic Cat |
|---|---|
| Model | ZR 7000 |
| Category | Offroad Vehicle |
| Language | English |
Key safety rules for operating the snowmobile, including alcohol, helmets, and hazards.
Specifications for gasoline and oil for 6000 and 7000 engines, including cautions.
Break-in procedures for 6000 and 7000 engines, including mileage guidelines.
Explanation of the digital gauge and its various indicators.
Procedure and precautions for engaging reverse on 6000 models.
Procedure and precautions for engaging reverse on 7000 models.
Essential checks of the brake system and controls before starting the engine.
Step-by-step guide for starting the engine, including cold start notes.
Managing brake fluid, proper use of the lever lock, and overheating risks.
Procedure for checking oil level in the 7000 model, considering temperature.
Detailed steps for changing engine oil and filter on 7000 models.
Using recommended plugs and understanding heat range indicators.
Steps for removing the battery, cleaning terminals, and safety precautions.
Warnings about brake fluid, overfilling, and the brake lever lock.
Procedure for bleeding the brake system if the lever feels spongy.
Checking drive belt for wear, cracks, or stretching and replacement.
Procedure for checking the proper fit and deflection of the drive belt.
Steps to adjust drive belt deflection using shim washers.
Detailed instructions for removing and installing the drive belt.
Procedure for checking track alignment relative to idler wheels and drive lugs.
Steps for adjusting track alignment and associated warnings.
Procedure for adjusting the headlight beam for proper vertical aim.
Inspection, removal, and installation of ski wear bars.
How to check and adjust drive belt deflection for optimal engagement.
Procedure for checking and correcting drive clutch/driven clutch offset.
Cleaning the snowmobile and preparing the engine for storage.
Cleaning, battery care, and storage location recommendations.
Cleaning, engine checks, and inspection of wires, cables, and belts.
To Next Page