To Next PageTo Next PageWhat to do if my Arctic Cove EVC700 fan is running, but the air isn’t cool?
If the fan in your Arctic Cove Air Conditioner is running but not cooling, there are a few potential reasons. First, check if the pump is turned off and turn it on. Second, the water container might be empty or the water level is low, so fill the water container. If these steps don't resolve the issue, contact customer service, as the pump may be damaged.
What to do if my Arctic Cove EVC700 emits an odor?
If your Arctic Cove Air Conditioner emits an odor, it could be due to a new filter media. This smell will dissipate after several hours of use. However, if the filter media contains mold, replace it immediately.
Why won’t my Arctic Cove EVC700 respond to the remote control?
Your Arctic Cove Air Conditioner might not respond to the remote control for several reasons. Ensure the unit is plugged in and turned on. If it is, replace the remote control batteries. Also, make sure the remote control sensor on the unit is not blocked. If the problem persists, contact customer service for repairs, as the unit may be damaged.
Guidance on using appropriate extension cords for safe operation and preventing overheating.
Specifies power requirements, voltage, frequency, and connection precautions.
Explains the importance of grounding and proper plug connection for safety.
Instructions on turning the unit on/off, adjusting fan speed, and using the pump.
General| Model | EVC700 |
|---|---|
| Type | Evaporative Cooler |
| Power Source | Electric |
| Voltage | 120V |
| Frequency | 60Hz |
| Fan Speed | 3 speeds |
| Cooling Capacity | Not applicable |
