Need help?Do you have a question about the Arctic Accelero Twin Turbo III and is the answer not in the manual?
Welcomes the customer and introduces the Accelero Twin Turbo III GPU cooler.
Lists all components and hardware provided with the cooler.
Instructions on how to detach the original GPU cooler from the graphics card.
Guidance on choosing correct spacers and washers based on GPU specifications.
Attaching the universal mounting plates to the GPU for cooler compatibility.
Securing the mounting plate to the GPU using screws and washers.
Locating critical high-temperature areas on the GPU for thermal pad application.
Placing thermal pads on the identified hot spots for optimal heat transfer.
Positioning and aligning the protective film on the GPU board.
Marking GPU components and cutting openings in the protective film.
Assembling the main heatsink units onto the GPU board.
Verifying protective film alignment and initial heatsink fastening.
Attaching clips and tightening them incrementally to secure the heatsink assembly.
Installing the assembled GPU cooler into the computer chassis.
Attaching the support bracket for added stability to the graphics card.
Advising on using ARCTIC MX-4 thermal compound for re-installation.
Information on the product's limited warranty and support resources.
General| Brand | Arctic |
|---|---|
| Model | Accelero Twin Turbo III |
| Category | Computer Hardware |
| Language | English |
To Next Page
