EasyManua.ls Logo

Arctic APL81013XLW3 - User Manual

Arctic APL81013XLW3
52 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1911861386 _RO 20-08-20.(14:49)
Numărul documentulu=
APL81013XLW3
RO/EN
Masină de spălat automată
Manual de utilizare
Washing Machine
User’s Manual

Table of Contents

Questions and Answers

  • G
    gonzalezsamuelSep 23, 2025
    Why is my laundry still wet after the programme ends on my Arctic APL81013XLW3?
    • T
      Thomas FinleySep 23, 2025
      If your laundry remains wet after the programme ends on your Arctic Washer, excessive foam might have occurred due to too much detergent usage. Use the recommended amount of detergent.
  • S
    sarahmendozaAug 23, 2025
    What to do if my Arctic APL81013XLW3 Washer does not fill with water?
    • M
      Matthew SullivanAug 23, 2025
      If your Arctic Washer isn't filling with water, check the following: - Ensure the tap is turned on. - Make sure the water inlet hose isn't bent; flatten it if it is. - Check if the water inlet filter is clogged; clean it if necessary. - Ensure the loading door is closed properly.
  • L
    Luis RileyAug 25, 2025
    How to fix an Arctic Washer that does not drain water?
    • B
      brittney64Aug 26, 2025
      If your Arctic Washer is not draining water, the following could be the cause: - The water drain hose might be clogged or twisted; clean or flatten the hose. - The pump filter might be clogged; clean the pump filter.
  • M
    Marvin HarmonAug 27, 2025
    What to do if the loading door of my Arctic APL81013XLW3 cannot be opened?
    • S
      Sean ThomasAug 27, 2025
      If you can't open the loading door of your Arctic Washer, it might be due to these reasons: - The door lock is activated because of the water level; drain the water by running the Pump or Spin programme. - The machine is heating water or is in the spinning cycle; wait until the programme completes. - The child lock is engaged; wait a couple of minutes after the programme ends for deactivation. - The door may be stuck due to pressure; push and pull the door to release it.
  • M
    Michael RomeroAug 27, 2025
    Why is my Arctic APL81013XLW3 leaking water from the bottom?
    • S
      Sheila HernandezAug 27, 2025
      If your Arctic Washer is leaking water from the bottom, it could be due to: - A clogged or twisted water drain hose; clean or flatten the hose. - A clogged pump filter; clean the pump filter.
  • D
    Douglas GutierrezSep 17, 2025
    Why do my clothes smell unpleasant after washing in my Arctic Washer?
    • S
      sheilajensenSep 17, 2025
      If your clothes smell unpleasant after washing in your Arctic Washer, it may be due to: - Odours and bacteria from washing at low temperatures or short programmes; leave the detergent drawer and loading door ajar after washing. - Overloading the machine; do not load in excess. - Damp detergent; keep detergents closed in a humidity-free environment.
  • J
    Jennifer JohnsonSep 14, 2025
    Why doesn't my laundry smell like softener after washing in Arctic APL81013XLW3?
    • K
      Kyle Knight IIISep 14, 2025
      If your laundry doesn't smell like softener after washing in your Arctic Washer: - Detergent might be in the wrong compartment; put it in the correct one and clean the dispenser. - Detergent might be mixed with the softener; don't mix them, and clean the dispenser.
  • T
    Tony StewartSep 15, 2025
    Why is foam overflowing from the detergent drawer of my Arctic APL81013XLW3?
    • W
      William ClarkSep 16, 2025
      If foam is overflowing from the detergent drawer of your Arctic Washer, it is likely because too much detergent is being used. Try mixing 1 tablespoon of softener with ½ liter of water and pour it into the main wash compartment of the detergent drawer.
  • A
    Andrew ChapmanSep 6, 2025
    Why is the washing performance poor in my Arctic APL81013XLW3: stains persist?
    • A
      Adam HendersonSep 6, 2025
      Poor washing performance with stains persisting in your Arctic Washer could be due to: - Insufficient detergent; use the recommended amount. - Overloading the machine; load the recommended amount. - Incorrect programme and temperature selection; select the proper settings. - Wrong type of detergent; use the appropriate detergent. - Too much detergent; put the detergent in the correct compartment and don't mix with bleaching agents.
  • B
    Brent BenderSep 3, 2025
    What to do if the programme cannot be started on my Arctic Washer?
    • M
      Ms. Brenda ContrerasSep 3, 2025
      If a program cannot be started or selected on your Arctic Washer, the machine may have switched to self-protection mode due to a supply problem. Press and hold the On/Off button for 3 seconds.

Summary

General Safety Instructions

Life and Property Safety

Ensures safe operation and prevents damage to property.

Childrens Safety

Protects children from potential hazards associated with the appliance.

Electrical Safety

Outlines precautions for safe electrical handling and connection.

Hot Surface Safety

Warns about hot surfaces to prevent burns.

Important Instructions for Environment

WEEE and Waste Disposal Compliance

Guides on environmentally sound disposal of electrical waste according to WEEE directive.

RoHS Directive Compliance

Confirms product compliance with RoHS directive on hazardous materials.

Packaging Information

Details on the recyclable nature of the product's packaging materials.

Intended Use

Technical Specifications

Installation

Covers site requirements, connections (water, electrical), and initial setup.

Preparation

Guides on sorting laundry, loading, and using detergents and softeners.

Operating the Product

Explains control panel functions, programme selection, and operational features.

Maintenance and Cleaning

Provides instructions for cleaning the detergent drawer, drum, body, and filters.

Troubleshooting

Arctic APL81013XLW3 Specifications

General IconGeneral
BrandArctic
ModelAPL81013XLW3
CategoryWasher
LanguageEnglish

Related product manuals