Need help?Do you have a question about the Arctiko SUF 100 and is the answer not in the manual?
Read instructions before commissioning for safety. Keep instructions available.
Warnings about ventilation, defrosting, refrigerant system, and electrical appliances.
Connect plug, locate in dry/cool place, place on solid substrate with clearance.
Unit must be properly grounded. Conform to codes. Do not connect to overloaded lines.
Plug in, thermostat flashes. Let freezer run 6 hours before changing thermostat.
Set thermostat to required temperature. Allow 4-5 hours for set temp. Cool down empty.
Disconnect by unplugging or using a double pole switch.
Explanation of SET, DEF, UP, DOWN keys and their functions.
Procedure to push SET key for >2s to change set point value using arrow keys.
How to start a manual defrost by pushing the DEF key for more than 2 seconds.
Steps to enter programming mode and change parameter values using keys.
How to lock and unlock the keyboard using specific key combinations.
Definitions for Hy, LS, US, Ot, OdS, AC, CCt, CCS, Con, COF, CH parameters.
Definitions for ALC, ALU, ALL, AFH, Ald, dAo parameters for temperature alarms.
To Next Page
General
