12
Instructions for use
Place the fan on a at, dry and stable surface, and insert the plug of the
fan in a socket. Select the desired speed by pressing the buttons on the
control panel (2):
0 =o 1 =minimum speed 2 =medium speed 3 =maximum speed
OSCILLATION:
For the automatic oscillation from right to left press the knob (4) placed
on top of the motor. To disable it, pull up the knob.
VERTICAL SLOPE:
You can vertically point the front of
the fan choosing the desired angle.
It is sucient to move the front of
the fan up or down according to the
desired slope.
Maintenance
Before carrying out the regular cleaning operations turn o the fan and
unplug it.
For external cleaning use a soft and dry cloth.
DO NOT disassemble the fan: this fan cannot be disassembled.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.
8. Place the front grille (12) on the back grille (7) making sure that the
logo on the central stud is placed horizontally, parallel with the oor so it
can be hooked together with the ring.
9. Find the proper position, close the ap of the lock ring (11) and replace
the safety screw (13).
To Next Page
Loading...
