40 / 44
DIY fuction modes
This menu contains 9 adjustable function modes:
Mode Description
(hh:mm)
(°C)
Steam 0:05 – 6:59 50 – 110
Strengthening heating
(Back heater convection + top heater +
bottom heater)
0:05 – 3:59 100 – 230
Top heater 0:05 – 3:59 100 – 230
Top heater + Bottom heater 0:05 – 3:59 100 – 230
Hot air convection
(Top heater + Rear fan)
0:05 – 3:59 100 – 230
Back heater convection
(Back heating + rear fan)
0:05 – 3:59 100 – 230
High-temperature steaming
(Steam + Back heater convection)
0:05 – 6:59 120 – 230
Back heater convection + Rotisserie 0:05 – 3:59 100 - 230
Top heater + Rotisserie 0:05 – 3:59 100 - 230
Descaling function
Default settings 0:50 Descaling of the evaporator
1. The descaling mixture is prepared according to the mixing ratio of 1:8 (125ml
of descaler for each litre of water) or according to the descaler instructions.
Note: use a descaler (not supplied) suitable for steam ovens..
2. Mix and put the mixture in the tank (6);
Note: The dosage of descaling mixture in the water tank may not
be lower than the MIN level marked the water tank.