GB
Maintenance
Disconnect the plug from the socket and let the appliance cool
down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasive products or chemical solvents.
Attenction: keep dry the appliance.
NEVER DIP THE APPLIANCE INTO THE WATER.
Cleaning the air inlet lter:
Make sure that the appliance is switched off and unplugged.
Remove the lter (Fig. A) and wash it with water only.
After carefully drying the lter,replace it correctly (Fig. B).
To swtch off the appliance, set the Air Flow Switch to “0”.
Disconnect the plug after use.
WARNING:
- Let the appliance cool down before storing it.
- Do not wrap the power cord around the appliance.
FIG. A
FIG. B
12
To Next Page
Loading...