6
16MP Quad-Camera Kit for Raspberry Pi
Instructions for Safe Use
To properly use the Arducam quad-camera kit, kindly note:
Before connecting, you should always power the Raspberry Pi o and remove the power supply
first.
Make sure the cable on the camera board is locked in place.
Make sure the cable is correctly inserted in the Raspberry Pi board’s MIPI CSI-2 connector.
Avoid high temperatures.
Avoid water, moisture, or conductive surfaces while in operation.
Avoid folding, or straining the flex cable.
Avoid cross-threading with tripods.
Gently push/pull the connector to avoid damaging the printed circuit board.
Avoid moving or handling the printed circuit board excessively while it’s in operation.
Handle by the edges to avoid damages from electrostatic discharge.
Where the camera board is stored should be cool and as dry as possible.
Sudden temperature/humidity changes can cause dampness in the lens and aect the
image/video quality.
To Next Page
Loading...