EasyManuals Logo

Arduino NRF24L01 User Manual

Arduino NRF24L01
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
The module can use 125 different channels which gives a possibility to have a network of
125 independently working modems in one place. Each channel can have up to 6
addresses, or each unit can communicate with up to 6 other units at the same time.
The power consumption of this module is just around 12mA during transmission, which is
even lower than a single LED. The operating voltage of the module is from 1.9 to 3.6V, but
the good thing is that the other pins tolerate 5V logic, so we can easily connect it to an
Arduino without using any logic level converters.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Arduino NRF24L01 and is the answer not in the manual?

Arduino NRF24L01 Specifications

General IconGeneral
Maximum Data Rate2 Mbps
Number of Channels125
InterfaceSPI
Data Rate250kbps, 1Mbps, 2Mbps
Operating Voltage1.9V - 3.6V
Current Consumption11.3mA transmitting, 12.3mA receiving
RangeUp to 100 meters (open space)
Dimensions15mm x 29mm

Related product manuals