EasyManua.ls Logo

AREA iCOOL MAX 17 MT - Page 35

AREA iCOOL MAX 17 MT
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ND18-05.01
Area Cooling Solutions Sp. z o.o.
Ul. Relaksowa 27
55-080 Nowa Wieś Wrocławska
tel/fax +48 71 354 56 24
35/48
przegrzanie
par wysokie
Zawilgocenie systemu
Uszkodzony zawór
rozprężny lub
elektromagnetyczny
(zamknięte)
8.
Niskie
ciśnienie na
ssaniu,
przegrzanie
par w normie
Zatkany filtr ssawny
Słabe obciążenie
parowacza
9.
Zbyt wysokie
ciśnienie
skraplania,
wysoka
temperatura
czynnika na
tłoczeniu
Niesprawny skraplacz na
skutek zabrudzenia
brak przepływu wody
zbyt dużych temperatur
otoczenia
braku właściwego
przepływu powietrza
(uszkodzone wentylatory)
10.
Zbyt wysokie
ciśnienie
skraplania,
niska
temperatura
czynnika na
tłoczeniu
Niesprawny skraplacz na
skutek zabrudzenia
brak przepływu wody
zbyt dużych temperatur
otoczenia
braku właściwego
przepływu powietrza
(uszkodzone wentylatory)
Zbyt duże napełnienie
instalacji czynnikiem
Wilgoć w instalacji
Zbyt duże obciążenie
cieplne parowacza
11.
Niskie
ciśnienie
skraplania,
wysoka
temperatura
czynnika na
tłoczeniu
Zbyt duże napełnienie
instalacji czynnikiem
Zatkany filtr cieczowy lub
uszkodzony wziernik
Uszkodzony zawór
tłoczny
Uszkodzony zawór
ssawny
superheat level
is high
Refrigerant level
too low
System is not dry
Expansion or
solenoid valve
damaged (closed)
8
Low suction
pressure,
vapour
superheat level
is normal
Suction filter
clogged
Evaporator load
low (coolers
clogged)
9
Condensation
pressure too
high,
refrigerant
temperature at
the discharge
side high
Condenser not
working properly
due to dirt build-
up,
lack of water flow,
too high ambient
temperature
or insufficient air
flow (fans
damaged)
10
Condensation
pressure too
high,
refrigerant
temperature at
the discharge
side low
Condenser not
working properly
due to dirt build-
up,
lack of water flow,
too high ambient
temperature
or insufficient air
flow (fans
damaged)
System overfilled
with refrigerant
System is not dry
Evaporator
thermal load too
high
11
Condensation
pressure low,
refrigerant
temperature at
the discharge
side is high
System overfilled
with refrigerant
Liquid filter
clogged or sight
glass damaged
Discharge side
valve damaged

Table of Contents

Related product manuals