QA03-SDA Installation Manual KWR-7QA03-20190503-EN-RU Page 4/16
STEP 1. ANALYSER Installation / ШАГ 1. АНАЛИЗАТОР Установка
1.1 Mounting locations / Монтажные площадки
For IP66 built analyser inside canopy
Для IP66 встроенный анализатор внутри навеса
температура
Operating: 0-50 degC; Storage: -10ºC to +60ºC
Операционная: 0-50 degC; место хранения -10ºC to +60ºC
1.2 Mounting angle / Угол монтажа
1.3 Mounting to the wall / Монтаж на стену
Remove the aluminum plates to mount the analyser to the wall
Use the "4-Mounting set" screws and bolts to mount the analyser to the wall