8
• Consider weather conditions, seasonal changes, and geographic location that
may affect energy production.
Mounting the Base
• Use the included screws to fix the base to your chosen mounting location. If the
surface is soft or unstable, use a 46.0 drill bit to create a hole, then insert the
anchor nail and secure the base with screws.
Assembly of Universal Joint
• Insert the locking screw cap into the universal joint. Screw the circular socket nut
into the universal joint.
Attaching the Solar Panel
• Screw the universal joint into the back of the solar panel securely using the
attached nut.
Mounting the Solar Panel
• Screw the locking screw cap into the base, ensuring the universal joint is angled
upward.
• Loosen the locking screw cap to adjust the solar panel left or right by turning the
sleeve rod. Tighten the locking screw cap when the panel is in the desired
position.
• The solar panel's angle can be adjusted up and down by up to 90 degrees.
Secure Installation
• After installation, ensure all locking mechanisms are tightly secured.
Optional Connection to Camera
• Connect the solar panel to the power port of the camera, if desired.
Specifications
To Next Page
Loading...
