4. Alarm and Detection
About Motion Detection
Arenti camera determines whether each macroblock has moved by dividing
the grid. When the number of moved blocks reaches a certain proportion of the
number of armed blocks, the alarm will start. The working principle of motion detection is
that camera will judge it as motion when differences in 2 frames reach 0.5%-10% (customize
by adjusting motion sensitivity) of the image. When the picture changes, the number
calculated and compared will exceed the threshold and instruct the system to automatically
make corresponding process.
Set up Motion detection and sensitivity
Go to camera live video page- Settings-Alert Settings-Motion detection-On
And you can choose and set the motion detection sensitivity.
Note: High-The most sensitive Level, It will detect more motions.
To Next Page
Loading...
