TRANSPORTATION, CLEANING, AND STORAGE
TRANSPORTATION. Transportation of the device is necessary by any kind of covered transport with the application of cargo securing rules
ensuring preservation of the presentation of the product and / or packaging and its further safe operation. DO NOT expose the device to shock
loads during handling operations.
CLEANING. The device needs to be cleaned regularly; remove all of the food residue from the surface of the multicooker
Before cleaning turn off the multicooker and unplug it from the socket. Let the device cool off completely. Wipe the control panel, the outer and the
inner surfaces of the multicooker with a wet cloth and detergent, wipe dry. Do not wash the body in water and do not spray water on it. Clean the
bowl with the warm water with detergent and wipe dry. It is recommended to wash the bowl right after the cooking. Remove the container to collect
condensed fluid, rinse it, rub dry and put it back. Remove the inner part of lid and sealing ring and wash it carefully.
To clean the lid, remove its inner part with the silicone ring by pulling the protruding silicone part located in the center of the lid. Wash carefully
the inner surface of the lid, pressure regulator and pressure control valve and wipe them dry with a soft cloth. Put the inner part of lid and sealing
ring back.
WARNING! Do not wash the removable parts in a dish-washer. The bowl can be washed in the dish washer, but take care so that it won't be
damaged. Wash the bowl in warm water with detergent and wipe dry. You should wash the bowl immediately after you finished cooking.
Do not use aggressive substances or abrasive materials.
STORAGE. The device must be stored indoors, in conditions that presume the preservation of the presentation of the product and its further safe
operation. Make sure that the appliance and all its accessories are completely dried, before storing it.
ENGLISH
WARRANTY TERMS
When purchasing the product, ask for it to be checked in your presence. Without the having a warranty card or when it is not properly filled in, the quality claims are not
accepted, and no warranty repair is performed. The warranty card should be presented at any address to the service
center during the whole warranty period. The product is accepted for service in a complete set only. The warranty period is calculated from the moment of sale to the buyer.
Keep the documents confirming the date of purchase of the product (cash receipt).
The condition of free warranty service of your product is its correct operation, which does not go beyond personal domestic needs, in accordancewith the requirements of
the operating instructions for the product, the absence of mechanical damages and the consequences of careless handling of the product.The product is accepted for
warranty service in its pure form. The warranty covers all manufacturing and construction defects (except those listed in the "Warranty does not apply" section), identified
during the warranty period. During this period defective parts, except consumables, are subject to free replacement in the warranty service center.
THE GUARANTEE DOES NOT COVER:
1. Defects caused by force majeure.
2. Damage to the product caused by the use of the product for purposes that go beyond personal domestic needs (ie industrial or commercial purposes).
3. Consumables and accessories.
4. Defects caused by overloading, improper operation, penetration of liquids, dust, insects, ingress of foreign objects into the product.
5. Products that have been repaired outside authorized service centers or warranty workshops.
6. Damage resulting from changes in the design of the product by the user or unqualified replacement of his components.
7. Mechanical damages, including due to negligent handling, improper transportation and storage, falling of the product.
8. Violation of the operating instructions.
9. Incorrect installation of mains voltage (if required).
10. Making technical changes.
11. Damage through the fault of animals (including rodents and insects).
Production month: refer to the date on the gift box
For warranty service, please contact your nearest service center.
Attention! If you hear a buzzer sound and the display shows the error during the operation, immediately disconnect the multicooker from the mains and take it to the service
centre.
Error code:
E1- the sensor circuit of the sensor is switched off.
E2- closure of the sensor.
E3- the device is overheated.
E4 - switch lock signal.
End of the operation. In order to decrease the pressure inside the device, press the pressure valve opening button. Attention!When you turn or lift the pressure valve
to decrease the pressure, the steam comes out of the unit! Be extremely careful when the steam is released. To prevent scalds keep your hands and face away from
the steam outlet.
It is not recommended to reduce the pressure immediately after "Preheat" temperature indicator lights up after the cooking process is complete. Let the unit to cool until
the pressure valve is in the down position. Failure to observe this precaution could result in steam release and burns.
Unplug the appliance from the mains and unplug the appliance.
Take the lid by the handle, turn the lid clockwise until you feel that the attachment between the body of the appliance and the lid is loosened. Remove the cover from the
device. Take the food (prepared dish) from the bowl.
Cautions while operation the bowl. Attention! The bowl surface has special nonstick coating, which requires gentle handling. To stir the dish, use a wooden or plastic
spatula. Don’t pour vinegar into the bowl, it can damange the coating. The bowl can change its color after some time of operation because of the contact with water and
detergents. That is normal and the multicooker cabe objected to further operation.
Don’t wash the body of the device under the current water, this can damage the device.
To Next Page
Loading...