Arestech MERA-2000 Series - Panel I;O; Front Panel

11
User Manual
1.3 Panel I/O
1.3.1 Front Panel
◼ Power On/Off Button
Press to turn on or off the system
◼ AT/ATX Mode Select Switch
Used to select AT or ATX power mode
◼ Reset Button
Used to reset the system
◼ Remote Power On/Off Terminal Block
Used to plug in a remote power on/off
terminal block
◼ PC/Car Mode Select Switch
Used to select PC or Car mode
◼ Delay Time Select Switch
Used to select car mode system to turn
off delay time
◼ USB 2.0 Port
Used to connect a USB 2.0/1.1 device
◼ Removable HDD Port
Removable 2.5" SATA HDD area
◼ Power LED
Indicates the power status of the system
◼ HDD LED
Indicates the status of the hard drive
◼ IGN LED
Indicates the status of the active ignition
◼ GPIO LED
Indicates the status of the GPIO defined
by customer
◼ Ethernet LEDs
Indicates the status of the active LAN
◼ Antenna Hole
Used to connect an antenna for optional
mini-PCIe Wi-Fi module
MERA-2000-2L