Need help?Do you have a question about the ARF CNC 6040 and is the answer not in the manual?
General| Spindle Precision | 0.01mm |
|---|---|
| Spindle Type | Water-cooled |
| Collet Type | ER11 |
| Spindle Speed | 24000 RPM |
| Repeat Accuracy | 0.05mm |
| Operating Voltage | 110V/220V |
| Software | Mach3 |
| Command Code | G code |
| Frame Material | Aluminum |
| Control System | DSP |
Safety warnings and essential precautions before operating the CNC machine.
Specifies minimum hardware and software requirements for running Mach3 software.
Instructions for downloading the Mach3 software installation package from the official website.
Guides the user through the Mach3 software installation process, including initial setup.
Steps to install the XHC USB Motion Controller driver, verified by Device Manager.
Instructions for copying and replacing the Mach3 profile for the ARF CNC 6040.
Configuration of port setup and axis selection, including kernel speed.
Configuration of motor outputs, specifying step and direction pins for each axis.
Configuration of input signals for home, probe, and emergency stop functions.
Configuration of output signals for spindle control, coolant, and charge pump.
Settings related to spindle control, including PWM control and speed.
Tuning motor parameters like steps per unit, velocity, and acceleration for axes.
Setting up motor homing and soft limits to define operational boundaries for axes.
Physical connection and diagnostic checks for the probe tool.
Steps to activate script editing and import the auto tool zero script.
Execution of the auto tool zero script and verification of Z-axis values.
Electrical diagram for the 220V model of the ARF CNC Benchtop control box.
Electrical diagram for the 110V model of the ARF CNC Benchtop control box.
To Next Page