ARGENTO E-MOBILITY Active Bike - Argento KPF: Package and Assembly

10
Argento by
Pininfarina
KPF
battery charger
charging cable
2 M5 screws and
2 washers
size 3 Allen
wrench
Method:
• Take the item out of the packaging
• Open the kickstand and check that the item is stable
Active Sport instructions
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Install the folding system ring
• Adjust the stem closing mechanism*
Argento by Pininfarina KPF - instructions
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Adjust the stem closing mechanism*