EasyManua.ls Logo

Argo AWMI 36 AHL User Manual

Argo AWMI 36 AHL
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TECHNICAL & SERVICE MANUAL
INDOOR UNIT: AWMI 28 AHL
AWMI 36 AHL
AWMI 50 AHL
AWMI 70 AHL
DC INVERTER MULTI-SYSTEM AIR CONDITIONER
AWMI 28 AHL
AWMI 36 AHL
AWMI 50 AHL
Destination: General area (50Hz)
Europe (50Hz)
Australia (50Hz)
General area (60Hz)
Indoor Model No. Product Code No.
AWMI 70 AHL
AWMI 36 AHL 38 703 0013
AWMI 50 AHL 38 703 0014
AWMI 70 AHL 38 703 0015
AWMI 28 AHL 38 703 0011
IMPORTANT
These air conditioners employ
new refrigerant R410A.
Pay special attention when
servicing the unit.
Wall Mounted Type Indoor Unit
< Combined Outdoor unit >
AE2MI56AH (2-room multi unit)
AE3MI70AH (3-room multi unit)
AE4MI91AH (4-room multi unit)
1. The indoor unit AWMI 70 AHL can only
be combined with a 4-room multi unit.
Therefore, do not combine it with a 2-
room multi unit or 3-room multi unit.
2.
For details about the combinations, refer to
“Unit Combination Table” in the
T. Service
Manual
for the Multi Outdoor Units.
NOTE
Capacity
3.6 kW
5.0 kW
7.0 kW
2.8 kW
W
NOV.2003

Questions and Answers:

Argo AWMI 36 AHL Specifications

General IconGeneral
BrandArgo
ModelAWMI 36 AHL
CategoryAir Conditioner
LanguageEnglish

Summary

TECHNICAL & SERVICE MANUAL

DC Inverter Multi-System Air Conditioner

Identifies the product type and lists available indoor unit models.

1. OPERATING RANGE

Defines the temperature conditions for cooling and heating.

2. SPECIFICATIONS

Lists technical details for the AWMI 28 AHL indoor unit.

2-1. Unit Specifications (AWMI 36 AHL)

Lists technical details for the AWMI 36 AHL indoor unit.

2-1. Unit Specifications (AWMI 50 AHL)

Lists technical details for the AWMI 50 AHL indoor unit.

2-1. Unit Specifications (AWMI 70 AHL)

Lists technical details for the AWMI 70 AHL indoor unit.

2-2. Major Component Specifications

Details key internal components like PCB, fan motor, and heat exchanger.

3. DIMENSIONAL DATA

Indoor Unit Physical Dimensions

Provides drawings and measurements for the indoor units.

4. REFRIGERANT FLOW DIAGRAM

Illustrates the refrigerant flow paths for different indoor units.

5. PERFORMANCE DATA

Shows air velocity at different distances and flap angles.

6. ELECTRICAL DATA

Details electrical connections for various indoor unit models.

7. INSTALLATION INSTRUCTIONS

7-1. Indoor Unit Installation Site Selection

Guidelines for choosing the proper location for indoor unit installation.

7-2. Connecting Indoor Units

Instructions and diagrams for connecting multiple indoor units.

7-3. Test Run

Steps to perform a test run after installation to verify operation.

8. FUNCTIONS

8-1. Operation Functions

Explains automatic operation, sensor dry, and PAM-a control.

8-2. Protective Functions

Details overload prevention, freeze prevention, and cold-air prevention.

Operation with the Remote Control Unit

Details how to use the remote to set the unit to automatic mode.

Setting the Timer

Instructions for setting the unit's internal clock.

9. TROUBLESHOOTING

Method of self-diagnostics

Outlines the steps for running the unit's self-diagnostic function.

Alert Symbols

Highlights warning and caution symbols used in the manual.

Safety Instructions

Provides essential safety guidelines for using the air conditioner.

Care and Cleaning

Instructions for cleaning the casing, grille, and filters of the indoor unit.

Troubleshooting

Lists common problems, their causes, and remedies.

Related product manuals