Argo MOOD User Manual

12
V 06/17
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT
FROM OVERHEATING.
The symbol below signals the above warning:
 The fan heater may cause the risk of fire if, while in operation, is
covered by or comes into contact with inflammable material
including curtains, drapery, blankets, etc. KEEP THE FAN HEATER
AWAY FROM THESE MATERIALS.
 Do not connect the fan heater to the power supply until it has been
correctly assembled or positioned.
 Do not run the cord under carpets. Do not cover the cord with
blankets, carpets or similar materials. Place the cord far away from
busy areas, or in a place where it cannot be accidentally pulled-out.
 Do not operate the fan heater in close proximity to bathtubs,
showers, washbasins or pools.
 The appliance is equipped with IP21 protection for use in private
bathrooms in Zone 3.

 Do not position the fan heater below a socket outlet.
 Do not operate the appliance outdoors.
 Upon initial start-up, the fan heater may emit a slight, harmless
smell. This smell is a normal effect of the initial heating up of the
internal heating elements, and should not recur later on.
WARNING:
THE ON/OFF SWITCH IS NOT THE ONLY METHOD OF
DISCONNECTING THE MAINS POWER.
ALWAYS UNPLUG THE APPLIANCE DURING MAINTENANCE
OPERATIONS, WHEN MOVING IT OR WHILE IT IS NOT IN USE.
Zone 3 Zone 2 Zone 1
Zone 0

Argo MOOD Specifications

General

Type	Fan electric space heater
Timer	Yes
Heating element type	Ceramic
Timer duration (maximum)	12 h
Heating power	2000 W
Heating power (min)	1300 W
Display	LED
Control type	Touch
Product color	Black, White
Placement options	Floor
Power consumption (standby)	1.5 W

Weight and Dimensions

Depth	169 mm
Width	214 mm
Height	508 mm