Argo STING - Control Panel

15V 07/22
CONTROL PANEL
1. ON/OFF
2. ECO heating mode (300 W)
3. COMFORT heating mode (600 W)
4. ECO heating mode (300 W) + swing
5. COMFORT heating mode (600 W) + swing
0
PROCEDURE OF MOUNTING THE BASE:
1. extract the body of the product and the two parts of the base;
2. hook the two parts of the base together (Fig.1);
3. ip the product and screw it to the base (Fig. 2 and 3).
Turn the rotary control knob to select the desired heating mode: the corresponding LED will light up on the control
panel.
You can select the lateral oscillation of the unit in addition to the ECO or COMFORT heating mode .
FIG. 1 FIG. 2 FIG. 3
HOW TO ASSEMBLE THE CARBON FIBER HEATER
2
1
3
5
4