16V 07/22
MAINTENANCE AND STORAGE
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
IMPORTANT: DO NOT SUBMERGE THE HEATER IN WATER.
Cleaning the outside surface of the appliance
Turn the switch off and unplug the appliance before carrying out any maintenance work or moving it. Use a soft cloth
to remove any dust from the heater. If the heater is excessively dirty, use a soft cloth moistened with water and a mild
detergent at a temperature lower than 50 °C. Let the heater dry completely before use. Do not use corrosive detergents
or solvents such as petrol. Do not wash the appliance with water. Do not use oils, chemical substances or other items
to clean that may damage the surface. Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
STORAGE
If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging,
in a cool and dry place
To Next Page
Loading...