Do you have a question about the Argon 18 E-118 NEXT and is the answer not in the manual?
Remove 3 stem cap screws and the stem cap to access the handlebar for disassembly.
Detach the handlebar by removing the four M6 screws from the stem assembly.
Carefully lift the handlebar upward, securing screws on the fork head to prevent loss.
Position the handlebar for travel, using protective material between frame and handlebar.
Fasten the handlebar to the frame and fork using straps for secure transport.
When using electronic shifting, unplug the connector wires as needed for disassembly.