3.Turn the Tuning knob to increase or decrease the hour value.
4.Press the Tuning knob to confirm and go to the minute section. A display similar to Figure 4-5 appears.
The current time is shown on the top middle of the display. The minute section of your alarm time flashes.
5.Press the Tuning knob to go to the Alarm Type submenu.
6.Turn the Tuning knob to select Beep or Radio.
7.Press the Tuning knob to confirm the selection.
The display similar to figure 4-6 shows that the alarm has been activated when the radio is broadcasting.
.
To Next Page
Loading...
