11.13 Other settings
The Settings menu provides general settings for the
Wireless Device Remote Control application.
From this menu, you can select the following options:
11.14 Inactive standby
Out of the box, the iNet3+V2 come with an automatic standby function. If the product is not operated for two
hours it will automatically go into standby. This applies also if the product is playing music.
This “feature” is a result of an EU law taking effect as of January 1
st
2014.
To deactivate or change this “feature”, do the following:
- Choose “Menu”
- Go to “System settings”
- Scroll down to “inactive standby” and press select
- Choose your preferred setting and press select
To Next Page
Loading...
