argon audio iNet3+ - 13.2 Troubleshooting

www.argonaudio.com
iNet3+v2
91
13.2 Troubleshooting
Problem
Cause
Solutions
PRODUCT: the product turn off
by itself
Automatic inactive standby
function activated
See page 86
FM: Hiss Low signal strength Check/move antenna
DAB: burbling/intermittent cut-
out
Move radio
Rescan local (high-strength) stations only
For DAB, check local coverage
DAB: ‘No stations available’
message
Low signal strength
As above then rescan stations.