Argos Camden 264/9971

To Next Page

MADE IN

BRITAIN

Dimensions

Width - 79.5cm

Depth - 49.5cm

Height - 183.5cm

Camden - 2 Door Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 4 - 24/03/14

Important - Please read these instructions fully before starting assembly

Ruler - Use this ruler to help correctly identify the screws

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

266/1021

264/9971

ALR2982

Step 9

Warning: The

robe is heavy.

Lift with care.

Fit the back panel

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit, coloured

surface facing down.

Note: The back must be

positioned so that it is

central on the unit.

Nail around the

outside edges of the

back .

Note: Nails should try to

be spaced out evenly.

Stand the unit up for

the next stage.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

The back must be

positioned central on the unit

- same gap on each side

Misaki 2 Door Robe

Due to continuous improvements to our products, please follow the

instructions below for fitting the back panel.

Issue 2 - 12/12/12 - Assembly method changed - Top is now fitted before the Left Side has been fitted.

Issue 3 - 12/12/13 - Extra Cat code added.

Issue 4 - 24/03/14 - New Cat codes.

Need help?

Do you have a question about the Argos Camden 264/9971 and is the answer not in the manual?

Summary

Safety and Care Advice

Important Safety Precautions

Key safety guidelines and warnings to follow before and during assembly.

Care and Maintenance

Instructions for cleaning and maintaining the unit after assembly.

Components - Panels

List of Furniture Panels

Identification and dimensions of all wooden panels included in the kit.

Components - Fittings

List of Hardware and Fixings

Identification and quantities of all screws, dowels, and other hardware.

Tools Required

Essential Tools and Identification Guide

List of necessary tools for assembly and a ruler for identifying screws.

Assembly Instructions - Step 1

Prepare the Left Side Panel

Detailed steps for preparing the left side panel with fittings.

Assembly Instructions - Step 2

Prepare the Right Side Panel

Detailed steps for preparing the right side panel with fittings.

Assembly Instructions - Steps 3-5

Prepare the Base Panel

Instructions for inserting hardware into the base panel.

Fit Base to Right Side

Attaching the prepared base panel to the right side panel.

Prepare the Top Panel

Instructions for inserting hardware into the top panel.

Assembly Instructions - Steps 6-7

Fit the Top Panel to Assembly

Attaching the prepared top panel to the main structure.

Prepare Plinth and Back Rail

Inserting hardware into the plinth and back rail components.

Assembly Instructions - Steps 8-9

Fit Plinth and Back Rail

Attaching the plinth and back rail to the right side panel.

Fit the Left Side Panel

Attaching the prepared left side panel to the main structure.

Assembly Instructions - Step 10

Fit the Back Panel

Securing the back panel to the unit, ensuring it is square.

Assembly Instructions - Steps 11-12

Fit the Hanging Rail

Inserting the hanging rail into the fitted rail holders.

Prepare the Doors

Fitting hinges to the doors at a 90-degree angle.

Assembly Instructions - Step 13

Fit Doors and Handles

Attaching the doors with hinges and fitting the handles.

Assembly Instructions - Step 14

Adjust Doors if Needed

Adjusting door height, forward/back, and sideways alignment.

Assembly Instructions - Step 15

Attach Bracket to Top

Securing the unit to the wall using the provided bracket.